10mm Brown Soffit Board

Brown Solid coloured Soffit boards are available in 2.5 & 5M lengths with widths of 175mm & 225mm. For use with Cappit & Fascia or as a general purpose finishing board, these boards can used as a direct replacement or over cap of existing soffits. Boards are usually pinned using Polytop Pins.

300mm Hollow Soffit Board Brown

These 300mm wide hollow soffit boards have a tongue and groove appearance and can be slotted together when a wider width is required. Easy to trim to the required size with a fine tooth saw these boards are the best choice for covering large areas.

10mm Starter "J" Trim Brown

This "J" shaped trim is used to finish the edges of hollow boards when they are left exposed.

10mm "H" Section Plank Joint Brown

This "H" section trim is used for joining the soffit boards and hollow cladding. Easy to fit with its flush appearance these trims make joining the boards easy.

10mm Black Soffit Board

Black Solid coloured Soffit boards are available in 2.5 & 5M lengths with widths of 175mm & 225mm. For use with Cappit & Fascia or as a general purpose finishing board, these boards can be used as a direct replacement or over cap of existing soffits. Boards are usually pinned using Polytop Pins.

300mm Hollow Soffit Board Black

These 300mm wide hollow soffit boards have a tongue and groove appearance and can be slotted together when a wider width is required. Easy to trim to the required size with a fine tooth saw these boards are the best choice for covering large areas.

10mm Starter "J" Trim Black

This "J" shaped trim is used to finish the edges of hollow boards when they are left exposed.

10mm "H" Section Plank Joint Black

This "H" section trim is used for joining soffit boards and hollow cladding. Easy to fit, with its flush appearance these trims make joining the boards easy.

10mm Soffit Board Pale Gold

Brown Solid coloured Soffit boards are available in 2.5 & 5M lengths with widths of 175mm & 225mm. For use with Cappit & Fascia or as a general purpose finishing board, these boards can used as a direct replacement or over cap of existing soffits. Boards are usually pinned using Polytop Pins.

300mm Hollow Soffit Board Pale Gold

These 300mm wide hollow soffit boards have a tongue and groove appearance and can be slotted together when a wider width is required. Easy to trim to the required size with a fine tooth saw these boards are the best choice for covering large areas.

10mm Starter "J" Trim Pale Gold

This "J" shaped trim is used to finish the edges of hollow boards when they are left exposed.

10mm "H" Section Plank Joint Pale Gold

This "H" section trim is used for joining the soffit boards and hollow cladding. Easy to fit with its flush appearance these trims make joining the boards easy.

10mm Soffit Board Anthracite Grey

Brown Solid coloured Soffit boards are available in 2.5 & 5M lengths with widths of 175mm & 225mm. For use with Cappit & Fascia or as a general purpose finishing board, these boards can used as a direct replacement or over cap of existing soffits. Boards are usually pinned using Polytop Pins.

300mm Hollow Soffit Board Anthracite Grey

These 300mm wide hollow soffit boards have a tongue and groove appearance and can be slotted together when a wider width is required. Easy to trim to the required size with a fine tooth saw these boards are the best choice for covering large areas.

10mm Starter "J" Trim Anthracite Grey

This "J" shaped trim is used to finish the edges of hollow boards when they are left exposed.

10mm "H" Section Plank Joint Anthracite Grey

This "H" section trim is used for joining the soffit boards and hollow cladding. Easy to fit with its flush appearance these trims make joining the boards easy.

10mm Soffit Board Light Grey

Brown Solid coloured Soffit boards are available in 2.5 & 5M lengths with widths of 175mm & 225mm. For use with Cappit & Fascia or as a general purpose finishing board, these boards can used as a direct replacement or over cap of existing soffits. Boards are usually pinned using Polytop Pins.

300mm Hollow Soffit Board Light Grey

These 300mm wide hollow soffit boards have a tongue and groove appearance and can be slotted together when a wider width is required. Easy to trim to the required size with a fine tooth saw these boards are the best choice for covering large areas.

10mm Starter "J" Trim Light Grey

This "J" shaped trim is used to finish the edges of hollow boards when they are left exposed.

10mm "H" Section Plank Joint Light Grey

This "H" section trim is used for joining the soffit boards and hollow cladding. Easy to fit with its flush appearance these trims make joining the boards easy.