These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give the extra Seal when fitted into any of the coupling featured.

An inline straight connector for joining 2 pieces of pipe.

As the name suggests, an easily fitted blank cap.

Designed to fit directly onto the base of your taps to allow simple connection. The connectors only require hand tightening when fitted.

Stem elbows are used to add a bend to an existing straight run without having to remove the present fixings

Exactly what it says. To allow barrier pipe to be connected to existing tanks.

These Brass Stop Valves are easily fitted.

These simple inline service valves are ideal for isolating areas of the system to allow servicing to be carried out on parts of the system.

These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

These 300mm long fully flexible connectors come with a speed fit connector on both ends. This allows for fast and secure connections on systems where the pipes do not meet.

These 500mm long fully flexible connectors come with a speed fit connector on both ends. This allows for fast and secure connections on systems where the pipes do not meet.

A straight coupler with a 15mm push fit one end and a 22mm push fit the other end.

A 22mm push fit on one end and a 15mm pipe on the other.

There are 4 Reducing Tees available. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22.

There are 4 Reducing Tees available. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22.

There are 4 Reducing Tees available. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22.

There are 4 Reducing Tees available. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22.

There are 4 Reducing Tees available. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22.

These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give an extra Seal when fitted into any of the couplings featured.

An inline straight connector for joining 2 pieces of pipe.

A standard 90 degree bend.

A Standard Tee Piece for splitting the circuit.

As the name suggests, an easily fitted blank cap.

Designed to fit directly onto the base of your taps to allow simple connection. The connectors only require hand tightening when fitted.

Stem elbows are used to add a bend to an existing straight run without having to remove the present fixings

Exactly what it says. To allow barrier pipe to be connected to existing tanks.

Fix the pipe clips, lay your pipe in, then snap over the cap to hold it securely. Its as simple as that.

These spacers are designed to simply fit in the back of the pipe clip. Some applications require the pipe to protrude from more. These spacers save you from having to fix blocks then attach the pipe clip.

These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

These 300mm long fully flexible connectors come with a speed fit connector on both ends. This allows for fast and secure connections on systems where the pipes do not meet.

These 500mm long fully flexible connectors come with a speed fit connector on both ends. This allows for fast and secure connections on systems where the pipes do not meet.

This mult-purpose manifold allows expansion to systems in one easy solution with 3 x 22mm and 4 x 15mm outlets.

Specialy Designed for cutting barrier pipe these cutters leave a clean edge to help avoid damage to seals when assembling the speed fit range.

Designed for connecting old imperial copper pipe to modern 15mm.

Designed for connecting old imperial copper pipe to modern 22mm.