Penosil Window & Door Elastic Gunfoam 198 750ml

PENOSIL Window & Door Elastic Gunfoam 198 is an one-component polyurethane gun foam for installation works and sealing of pressure sensitive, movable joints and penetrations.

• Excellent air tightness, thermal and sound insulation properties

• Permanent elasticity

• Near-zero curing pressure and low post expansion guarantees

• No warp

• Very good adhesion on many materials

USAGE INSTRUCTIONS

Surfaces must be clean from dust, loose particles, ice and oil stains.

Moisten dry surfaces with water mist (only at temperatures above zero) to ensure faster curing time and better end results.

Shake the can vigorously at least 20 times. Hold the foam can in an upright position with the valve up. Screw the can to the gun. Hold the can upside down when extruding the foam. Foam output can be adjusted with a gun trigger and adjustment screw.

Fill the joints up to approx. 70%. In case of larger joints, apply foam in several layers and moisten slightly between each layer. Excess foam can be cut after it has fully cured.

Do not aim the gun at people. Avoid screwing the can to the gun with valve upside down. Do not screw the gun to the can. Do not bend or turn the can during screwing.