3.5M Eden Glazing Bar For 4,6 &10mm Sheets

3.5M Frame Supported Eden Glazing Bar The Eden Glazing Bar is an economic, frame supported bar comprised of two plastic parts that clip together onto polycarbonate roofing sheets varying in thicknesses from 4mm, 6mm, 8mm and 10mm. As standard, this bar is used as a central joint bar. However, if meaning to be used as an edge bar, a separate trim will be required. Bar width is 50mm, each base section should be fixed every 400mm along its length. Only stainless-steel screws should be used.