-
Eden & Avon Foam Eaves Filler (10)
(GAEF)
Foam eaves fillers for use with the timber frame glazing bars and polycarbonate sheets. These fillers are installed inbetween the glazing bars on the front beam and also on purlins if required.
Availibility: In stock£8.63 £7.19 -
Peak & York Eaves Filler (10)
(PEF)
These eaves fillers are designed for use with our PEAK and YORK glazing bars systems.
Availibility: In stock£8.95 £7.46 -
Polycarbonate Sheet Fixing Buttons Pack of 10
(BXX)
Multiwall polycarbonate sheet fixing buttons are 45mm in diameter with a shaft the same length as the sheet thickness (16mm shaft for 16mm sheets) this prevents over tightening and crushing of the sheet.Availibility: In stockAs low as £6.04 £5.03 -
Aluminum Tape fo Polycarbonate Sheets
(TAXX)
Sold in 10M rolls the aluminium tape is used for sealing the open ends of your polycarbonate sheets at the top end (highest point) of the roof.Availibility: In stockAs low as £2.15 £1.79 -
Ventilation Tape for Polycarbonate Sheets
(TVXX)
10M x 37mm Breather (Vent) Tape for 16mm Polycarbonate SheetsAvailibility: In stockAs low as £6.47 £5.39 -
Polycarbonate Sheet End Closure | U-Drip
(UXX)
2100mm x 25mm Polycarbonate Sheet End Closure WhiteAvailibility: In stockAs low as £1.92 £1.60 -
2000mm x 16mm Polycarbonate Sheet End Closure Plain Aluminium
(UTA20PA)
Originally designed and manufactured by C & A for our Sanctuary Canopy System these aluminium sheet end closures give a tight fit to 16mm polycarbonate sheets.Availibility: In stock£8.59 £7.16 -
2000mm x 16mm Polycarbonate Sheet End Closure Aluminium Anthracite Grey
(UTA20AG)
These Anthracite Grey Sheet Enclosures were designed and manufactured by C & A for use with our Sanctuary Canopy Systems but can be used with any 16mm multiwall polycarbonate sheets.Availibility: In stock£10.75 £8.96