Cedral Plank Gecko 11mm - 7/16" Installation Tool (pair)

These Gecko Gauges are used to install fibre cement cladding planks. for 11mm - 7/16" thick boards

They are slide under the bottom edge of the first fixed board and clamped. The next board is set on the step in the top edge of the guage to give the correct overlap.The new board is then fixed in to place. The clamps are removed and clamped on to the board you have just installed ready for your next board. 

You will need to set the gauge height before your installation to get the correct overlap, once set further changes are not required.

Adjusts at 10mm increments for 100-240mm reveals.