Hardie® Plank Gecko 8mm - 5/16" Installation Tool (pair)

Hardie Plank installation Gecko Gauge is like an extra set of hands for fast, accurate cladding installation. It practically eliminates layout time.

These Gecko Gauges are used to install fibre cement cladding planks. for 8mm - 5/16" thick boards

They are slide under the bottom edge of the first fixed board and clamped. The next board is set on the step in the top edge of the guage to give the correct overlap.The new board is then fixed in to place. The clamps are removed and clamped on to the board you have just installed ready for your next board. 

You will need to set the gauge height before your installation to get the correct overlap, once set further changes are not required.

Adjusts at 10mm increments for 100-240mm reveals.