Call Us Today On 
Roofing, Glazing Bars and Domes
-
Hawk Mid Range Frame Supported Glazing Bar
(HBXX)
The Frame Supported Hawk Glazing Bar is a visually unobtrusive and easy to install, simple, yet strong, 2 piece frame supported bar.Availibility: In stockAs low as £16.56 £13.80 -
Plastic Coated Steel Corrugated Sheet | CA32 Profile
(R32XX)
0.7mm Thick Plastic coated steel sheets in the CA32/1000 profile are a strong reliable product used in the roofing and cladding of new commercial buildings and a great choice for garage roofs that require a level of security.
Availibility: In stockAs low as £52.56 £43.80 -
Brett Martin R-Glaze Roofing Sheet
(R-GLAZE)
Marlon R Glaze polycarbonate panels provide the ideal solution for covering a canopy or pergola, creating the ideal outdoor space for relaxing, entertaining, exercising or just spending time with friends and family.Availibility: In stockAs low as £55.20 £46.00 -
Vale Glazing Bars
(VBXX)
The Frame Supported Vale Glazing Bar is a simple, yet widely popular, multi-use, frame supported joining bar. This bars simple design can be utilised to join any glazing flat sheet material of any thickness.
The VALE Glazing Bar is a simple yet hugely popular product allowing users to join ANY glazing sheet material of ANY thickness, with a strong aluminium core and plastic capping. Initially designed for joining Glass panels on lean-to roofs, this bar has also proven very popular with the use of polycarbonate sheeting, all that is needed is a long enough screw! The draw back to this is care needs to be taken to ensure that the VALE Bar is not over-tightened which may cause damage to the glazing sheets. Once secured the PVC Cover Cap clips on ensuring that water can not enter the fixing channel or leak through the roof. The Glazing bar is 60mm wide and the rubber base gasket is 45mm
BARREL VAULTED ROOFS
The VALE bar is ideal for use in barrel vaulted roofs where the structural frame is shaped to a curve. This is because the bar can be pulled to the correct curvature using the fixing screws to a minimum 3 metre radius curve.
FIXING VALE BARS DOWN
Frames should be flat and stable, made of timber or metal and be at least 45mm wide. The Aluminium Core is screwed on top of the Base Seal every 400mm. At the lower (gutter) end of the roof, bars can overhang the Support Beam by 50mm. RUBBER SEALS/ GASKETS The VALE Bar is C&A’s only Frame Supported Bar which uses rubber Gaskets. The bar consists of a Base Seal which is glued to the supporting beam/ timber, then the screwed down Aluminium Core which houses a further two Primary Seals.
Availibility: In stockAs low as £20.16 £16.80 -
Corrugated Sheet | Big 6 Profile | Transparent PVC
(R106XX)
BIG 6 profile clear PVC corrugated-roofing-sheets are 1.3mm thick and 1080mm wide to give a 1000mm cover when overlapped. They conform to BS476 Pt 1 & BS4203 Pt 1.Availibility: In stockAs low as £32.76 £27.30 -
PVC Corrugated Sheet 3" Cement Profile
(RCXX)
PVC corrugated roofing sheets are available in a 0.8mm thickness (5 Star) or a 1.3mm thickness (10 Star) in a 3” traditional fibre cement profile and are ideal for cheap and easy roof coverings.Availibility: In stockAs low as £13.80 £11.50 -
Corrugated Sheet | 3" Cement Profile | Fibre Glass
(RF3XX)
3 inch cement profile fibreglass sheets are 750mm ( 2 ft 4 inch) wide, giving 650mm ( 2 ft 2 inch) of cover when lapped. These sheets are class 3 fire rated and are 1.83 kg per square meter, designed for general domestic buildings.Availibility: In stockAs low as £46.92 £39.10 -
Mardome Reflex Domes
(DXX)
Mardome Reflex Double or Triple skin glazing‑only Replacement dome unitAvailibility: In stockAs low as £188.40 £157.00 -
ClassicBond 1.2mm EPDM Flat Roof Kits
(FLAT-ROOF)
ClassicBond EPDM Rubber Flat Roof Kit with 1.2mm membrane, adhesives and trims. Durable, waterproof roofing solution for garages, extensions and porches.
Availibility: In stockAs low as £359.88 £299.90 -
3 Inch Iron Profile Corrugated Eaves Filler Pk 10
(RGEF3)
Pack of 10 eaves filler strips for 3 inch iron/steel corrugated-roofing-sheets.Availibility: In stock£7.68 £6.40 -
Plastic Coated Steel 3M Ridge Section
(R3RXX)
3M Ridge Trim COL/PLAST Goosewing GreyAvailibility: In stockAs low as £43.20 £36.00 -
Onduline & Onduvilla Nails
(ROBNXX)
Onduline Nails – Durable, Colour‑Matched Fixings for Onduline & Onduvilla Roofing
Availibility: In stockAs low as £1.44 £1.20
Subcategories
Shop corrugated roofing sheets at CABP. Choose from PVC, polycarbonate, GRP fibreglass, Onduline bitumen and steel roofing sheets with matching fixings and accessories. Fast UK delivery.
Find durable & lightweight polycarbonate roof sheets for conservatories, carports, and more at C & A Building Products. Choose from multiwall & corrugated options in various thicknesses and colours, all with UV protection.
Shop glazing bars for polycarbonate roofing sheets at CABP. Choose from frame-supported and self-supporting roof bar systems, including Eden, Hawk, Avon, Vale, Peak and York glazing bars with matching accessories.
Shop Clickloc polycarbonate roofing sheets at C&A Building Products. These easy-fit panels are ideal for verandas, carports, canopies, and vertical screens. Durable, UV-protected, and designed for quick installation without glazing bars.
Discover Marlon R‑Glaze polycarbonate roofing panels at CABP—lightweight, impact‑resistant and UV‑protected. Ideal for canopies, pergolas, carports and outdoor roof structures. Easy to install with notched flashing, fixing screws and weather‑resistant components.
Explore durable EPDM rubber roofing kits at CABP. ClassicBond flat roof systems with long lifespans, UV resistance, easy installation and custom kit calculators.
Explore CABP’s range of Brett Martin flat roof domes and skylights—ideal for adding natural light to dark spaces. Choose from standard domes, access roof domes, vented kerbs and replacement dome lids. Durable, impact‑resistant and easy to install.
