4M HAWK Frame Supported Glazing Bar White For 10,16 &25mm Sheets

4M Frame Supported Hawk Glazing Bar

The Hawk glazing bar is a visually unobtrusive and easy to install simple, yet strong, frame supported bar. It consists of a slim 48mm wide, aluminium base section and low-profile PVC top cap that work in unison with roofing sheets varying in thickness from 10mm, 16mm and 25mm polycarbonate sheets.

Bar width is 50mm, each base section should be fixed every 400mm along its length. Only stainless-steel screws should be used.

As standard, this bar is used as a central joint bar. However, if meaning to be used as an edge bar, a separate trim will be required.